Coronado Stone veneer can be applied to any structurally sound surface. No foundation or structural changes are necessary, as Coronado Stone veneer becomes an integral part of the surface to which it is attached
Scratch Coat:
When required, a sand and cement mortar mix will then be applied over the metal lath, as thin as possible, but making sure that the lath is completely covered and SURFACE IS LEVEL. Scratch up the plastered surface while it is still wet using a leaf rake, hand rake or mason's scratcher, so that the surface is not too slick or smooth. Most codes require the coat to dry 48 hours before applying stone.
Check recommended product application prior to starting.
When required, a sand and cement mortar mix will then be applied over the metal lath, as thin as possible, but making sure that the lath is completely covered and SURFACE IS LEVEL. Scratch up the plastered surface while it is still wet using a leaf rake, hand rake or mason's scratcher, so that the surface is not too slick or smooth. Most codes require the coat to dry 48 hours before applying stone.
Check recommended product application prior to starting.